Ultra-V Connect™

Ultra-V Connect™ is a high-intensity rapid decontamination technology created by Inivos to prevent and control infection in health spaces and keep patients and staff safe.

Ultra-V Connect™

The Ultra-V Connect™ is a discreet device which uses high intensity UV-C light to decontaminate surfaces effectively, efficiently and routinely. Mounted to a ceiling, it provides remote, automated and validated decontamination making it perfect for areas which need to be disinfected routinely such as urgent care, isolation rooms and dental surgeries where patient turnover is high.

Every Ultra-V Connection system or systems are designed to be able to provide a variety of validated processes in any given room or environment. For example, within a side room the system can be set to have specific targeted decontamination cycles for the whole room, the patient bed only, bed and bedside chair and so on. This provides excellent flexibility and can shorten turnaround times.

Locations, layouts, zoning and custom decontamination cycles are planned, mapped out and configured based on understanding your needs. All of this is delivered in a system which takes out the hard work for you. All custom process can be safely actioned on-demand via the wireless user monitor location outside the treatment area or areas.
This proven technology, which is used by healthcare around the world, has been independently validated.

Ultra-V Connect™ installation

Ultra-V Connect can be fixed to the ceiling in the room in which decontamination is required with the process monitor, from which it is operated, mounted to the wall outside the room. Its diverse design means it can easily be integrated into new builds or retrofitted into older building types. The Ultra-V Connect can be fitted flush to the ceiling or suspended – depending on ceiling heights.
The system has auto-deactivation safety sensors, three high intensity germicidal UV-C lamps and calibrated efficacy. It uses a card reader system to allow safe operation by approved staff only and remote touchscreen with clear step by step instructions.

Intuitive Operation

Running the decontamination cycle uses step by step instructions on the touch screen display making it a simple process for the operator. The user simply presents their operator card to the contactless NFC reader to access the programme. The decontamination cycle is run from the wall mounted process monitor. The USB modem allows for a wireless connection to the Ultra-V Connect device to start the process. A connection can also be made via your own building’s Wi-Fi.

Ultra-V Connect™ validated assurance

Intelligent reporting

Information on each cycle is delivered direct to your inbox. An email is automatically generated after the process has been completed which contains a report on the decontamination cycle. This provides a robust audit trail and security in the efficacy of Ultra-V Connect.

Spectrome™ Monitoring

Routine calibrations are a key part of our ongoing service level agreements. These ensure the process cycle times are correct and concur with those originally set up for each system. This ensures efficacy of the system is maintained and recorded.

Reducing the Risk

The integrated passive infrared sensors (PIR sensors) mean Ultra-V Connect can detect entry into the room and automatically interrupt the decontamination process. For effective safety the PIR sensors are positioned to achieve full coverage of its environment.

Chemical Free

Ultra-V Connect has been designed to work without the use of chemical compounds in its decontamination. This removes any potential risks and environmental problems associated with biochemical disinfection devices.

Fast and Efficient

Ultra-V Connect is designed to decontaminate small rooms in as little as eight minutes. The room can be re-entered immediately after the completion of its cycle meaning no down time is required before it can be used again.

Product Comparison

Disinfection Robots

Touch the images above to view comparisons
Product name Technology External remote process monitor Validated Reporting Power sockets needed Average time to decon single bedroom Infection log reduction Consumables used Transports as single unit Deactivation required Safety sensors Safe system access Validated efficacy Process validation Single module (unit) system
UV-C
Fully Installed
30 mins
Log4-5*
3 UV lamps
Fixed unit
Approved user card
Calibration using Spectrome technology
Yes
UV-C
1
45 mins
Log4-5*
5 UV lamps
Yes
Approved user card
Spectrome technology
Yes
HPV
1
2hr
Log6*
Proxcin solution 7.5% H2O2
Yes
Approved user card
Built in Process Analyser with SmartCycle A
Yes
HPV
1
3hrs
Log6*
Deproxin solution 5% H2O2
Yes
Approved user card
Remote process analyser
Yes

Ultra-V Connect™ Brochure

Download the brochure