Fire Detector CapKit (CapKit and TeleProp)
The kit comes complete with a telescopic pole (TeleProp) with anti-slip foot and rigid plastic smoke detector cap (CapKit) attached to the reverse end of the pole. The rigid cap is placed over the smoke detector head and the pole is extended to a flat fixed surface. This provides support to hold the cap in place throughout the treatment process.
The smoke detector kit is easy to remove at the end of a decontamination process by simply releasing the pole and removing the rigid plastic cap from the smoke detection head. During each hydrogen peroxide vapour treatment cycle the kit is also decontaminated which means maintenance is low. All that should be required is to keep the equipment free of dirt/debris and ensure the extension and locking mechanisms on the TeleProp are functional.
- A smoke detector restrictor, made in PU plastic (UL 94 V-0) and silicone rubber.
- A teleprop pole to be fitted in the recess on the ventilation cover (extension range: 1415 – 3715mm)
Dry and out of direct sunlight
For sealing ventilation grilles in a hospital room during a hydrogen peroxide vapour decontamination process
Warnings / Precautions
Manual handling warning, caution must be taken when lifting ventkit and raising over head
|5051||Smoke detector restriction kit (1 x CapKit and 1 x TeleProp)|
|1||Apprx. 330mm inc. silicone gasket|