Deprox™

Regulated vaporisation system for bio-decontaminating enclosed spaces.

Our well established Deprox™ system delivers low concentration vaporised hydrogen peroxide safely and effectively.

Deprox™ is designed to be operated by regular hospital cleaning staff.

We provide full training and 24/7 support.

The effective environmental decontamination cycle by Deprox™ takes around 2 hours 40 minutes. Times will vary depending on the environmental parameters, size and contents.

There is a newer version of this product available

Powerful

The technology used by Deprox™ monitors and adjusts the process to ensure consistent results in the reduction of surface contamination.

Safe

The vaporisation technology releases microscopic droplets that travel around the area to disinfect and create a safe environment. For the operator’s safety, the device is activated from outside the treatment area.

Cost-effective

Deprox™ has been proven to successfully reduce microorganism transmission within hospitals, decreasing patient stay-times and occupied bed numbers.

Talk to us

Validation

Our technology comes together with validation reports from an executive agency and case studies from our clients.

We are always ready to listen and to answer any questions or concerns that you may have about the device or the service.

We conduct regular checks of all our Deprox™ machines. In case of unexpected breakdown, we will provide you with 24/7 support and a quick replacement.

Accessories

In order to perform effective decontamination using Deprox™ several accessories are used:

Vent Cap – to enable the sealing of ventilation grilles

CapKit – to cap smoke detector heads and prevent false fire alarms.

Sealant Tape – 75mm DVI tape ensures doors and ventilation grilles can be easily sealed.

DoorBar – to secure double doors during contamination and prevent anyone entering the room.

Support and training

Deprox™ can be operated by any regular hospital cleaning staff and we provide in-depth training and certification to all hospital operators.

Once you understand how to use Deprox™ you have a full control of your cleaning schedule and activities.

You’ll never need to worry about preparing the right disinfectant concentrations or being exposed to cleaning products.

Deprox™ technology is safe to use. With standard treatment cycles, it ensures stability in all situations.

Talk to us

Watch our Deprox™ training video

 
Product Comparison

Disinfection Robots

Touch the images above to view comparisons
Product name Technology External remote process monitor Validated Reporting Power sockets needed Average time to decon single bedroom Infection log reduction Consumables used Transports as single unit Deactivation required Safety sensors Safe system access Validated efficacy Process validation
HPV
1
3hrs
Log6*
Deproxin solution 5% H2O2
Yes
Key
Attached process analyser
HPV
2
2hr
Log6*
Proxcin solution 7.5% H2O2
Yes
Approved user card
Built in Process Analyser with SmartCycle A
UV-C
2
30 mins
Log4-5*
10 UV lamps
Yes
Approved user card
Spectrome technology
UV-C
Fully Installed
30 mins
Log4-5*
3 UV lamps
Fixed unit
Approved user card
Calibration using Spectrome technology